DROP THE WAIT TIME – INSTALLING NOW – CALL US ON 1800 215 216

ABOUT OKUSLIDE®

OKUSLIDE® is a UHMWPE lining that is manufactured by OKULEN. A company that has been producing high quality polymers for 45 years in Germany. Our OKUSLIDE® liner systems can be installed in any application where bulk material flow is restricted, caught or causing excessive abrasive wear. The most common installation in Australia is lining tipper truck bodies however its applications are limitless.

INDUSTRIES WE SERVICE

The correct blend of road base consists of 20mm crushed rock and highly compact able fine particles, causing hang up and flow promotion issues when tipping. 

Excavator buckets, loaders and dozers are often in contact with wet and sticky product. OKUSLIDE® liners transform them into a non-stick surface.
Construction and building material haulage can be extremely sticky and abrasive. With an OKUSLIDE® installation it doesn’t have to be.
Transporting dry materials which are powdery or granular are perfectly suited to OKUSLIDE®
In the competitive mining industry every minute counts, and OKUSLIDE® withstands even the most demanding schedule
Transporting grain one day then agricultural lime the next demands a clean workforce. OKUSLIDE® is FDA approved and ready to work for you.
Play Video

OKUSLIDE® (Premium Blue)

The low surface energy of OKUSLIDE® compared to other materials such as aluminium or wear resistant steel creates an ultra low stick surface that works better with wet products. The result is a quicker discharge time, lower tipping angle and more time on the road. An OKUSLIDE® liner system can be installed in as little 2 hours and in many different applications.

BENEFITS

  • Reducing time to tip, resulting in more time on road completing deliveries.
  • Reducing the tipping angle, increasing safety by reducing the likelihood of a ‘roll while tipping incident’ (RWT).
  • Low surface energy material reduces the ‘sticking’ of material to the contact surface (Cross contamination).
  • Higher abrasion resistance than Aluminium, Steel or even Hardox.
  • Can be installed in spot locations to reduce wear or hang up in focused areas without the need for full reline.
OKUSLIDE® is a Ultra high moluecular weight polyethylene with selected additives to further reduce static friction, combined with the robust abrasion resistance of UHMWPE it out performs Aluminium, Steel and even Hardox in labratory and field trials. The lower friction co-efficient results in a tipping angle of up to 30 degrees less than aluminium truck bodies. This reduces wear on the hoist, reduces time spent tipping and most importantly a lower center of gravity while tipping.  Giving an overall safer operation. OKUSLIDE® can be installed in new builds, or extend the life of an existing build by being installed over an old truck body due for renewal.

Yes, this is fine. We can easily install in 1 day.

WORK SMARTER NOT HARDER
OKUSLIDE®
ADVANTAGES CAN
BE REALISED ACROSS
MANY APPLICATIONS

Engineered and Manufactured in Germany - Installed & Supported in Australia

OKUSLIDE® is manufactured in Germany by OKULEN, who have been an integral supplier to Bearing Thermal Resources distributing material for +20 years throughout Australia.

With an extensive support network of installers specialising in truck, hopper and dozer equipment installations across a range of industrial sectors can be carried out nation wide.
After sales support extends back to Germany with access to Engineering and laboratory testing to ISO standards to determine the most effective solution available tailored to suit your project budget.

Our Installation Network

Chriss Body Builders
Sunshine, Melbourne
https://chrissbodybuilders.com.au/

Tipper Tarps
Laverton, Melbourne
https://tippertarps.com.au/

Hercules QLD
Darra, Queensland
https://www.hercqld.com.au/

Hercules
Kilsyth, Melbourne
https://hercs.com.au/

Borcat Trailers
Wetherill Park
https://www.borcat.com.au/

Shephard Transport Equipment
Larapinta, Brisbane
https://www.ste.com.au/

Brown and Hurley
Coffs Harbour
https://www.brownandhurley.com.au/

Central Victorian Welding
Bendigo, Victoria

Howard Porter
Spearwood, Perth
https://www.howardporter.com.au/

Grant Engineered
Penrith, Sydney
https://www.grantengineered.com.au/

Haulmark Trailer 
Edinburgh, Adelaide
https://haulmark.com.au/

INDUSTRY INSIGHTS

We will discuss the factors to consider when choosing the right plastic bed liner for your dump truck, with a special focus on OKUSLIDE® bed liners.
Protecting your truck bed is a wise investment, and choosing the right bed liner is crucial. OKUSLIDE® bed liners, with their exceptional durability and versatility, are the future of truck bed protection.

GET IN CONTACT

Book a call back from our experienced team to assist with your questions using the form below.
GET IN CONTACT
Please include as much information as possible for your project so that we may direct your inquiry to your nearest installer for a fast and efficient quotation.